DAS NX-148E LCD Codepad Manuel d'utilisateur télécharger pdf (Page 5)

GLOSSARY OF TERMS

Abort Delay: An option that allows a delay in reporting to the central station.

Authority Level: The level of access an individual has when using an alarm

panel.

Central Station: Location where alarm data is sent during an alarm report.

Chime Feature: An option that allows the code pad to sound a ding-dong

whenever an entry/exit door is opened.

Codes: Can be either User Codes (relating to a person) or Function Codes (a

toggle switch to turn specific functions on/off). NOTE: A system may have either

99 four (4) digit codes or 66 six (6) digit codes, but not a mixture of the two.

Duress Code: An option that allows a special code to be sent to the central

station that indicates the alarm system is being operated under duress.

Forced Arming: An option that allows the system to be turned on (ARMED) with

one or more zones open. A system that is ready to be “force armed” will flash

the ready light. (Note: Those zones that are not ready will not create an alarm.)

Function Code: A Function Code is either a four (4) or six (6) digit code that has

been programmed by the installer to operate a device.

Group Bypass: An option that allows the user to bypass multiple zones with a

single operation.

Master Code: A master arm/disarm code that can program other user codes.

Multi Area System: A system divided into multiple areas in which its own user

or users control each area.

Partial Arm: A mode used to arm the perimeter and unused areas of an

occupied premises.

Perimeter: The outer edge of the protected area.

Quick Arm: An option that allows you to turn on (ARM) the security system by

pressing either the [ON] or [PARTIAL] key on the code pad control (for ARMING

only) as programmed by the installing company.

Universal Arming (Uni Arm): When enabled, your alarm system can

automatically determine whether to arm in the Full mode or in the preset Partial

mode by looking to see if you exit your premises or stay inside after arming your

system. Note: This feature can be used in conjunction with “Quick Arm”.

User Code: A four (4) or six (6) digit entry used to arm or disarm the system.

1 2 3 4 5 6 7 8 9 10 ... 32 33

Pas de commentaire

DAS NX-148E LCD Codepad Manuel d'utilisateur Page 5